General Discussions about Jio AirFiber

  • Thread starter Thread starter Bapun
  • Start date Start date
  • Replies Replies: Replies 159
  • Views Views: Views 23,826
Regarding the Jio Airfiber Plus and it's "not so good" performance, I wonder if jio is actually daisy-chaining the 3 A6s together via SFP+, instead of seperate SFP+ to each of the 3 A6 on the tower. Only way to find out is via the tower guys, if someone have good relations with them, or have a tower installed in their locality/own building with A6 installed.
Will ask someone. Will update by tomo
 
My question was, if I connect an AirFiber router to another AirFiber Plus splitter's connection, will it work? I'm not talking about using it as an extender. For example, if I take my router to someone else's house and connect it to their AirFiber Plus antenna, will it function?
Most probably yes, but you need to try out first, before drawing any conclusion. If Jio uses MAC Bind or some sort of whitelisting, then we will get to know via this.
You have to test that out by connecting an AF Router to the Mimosa or vice versa first, except to going through the RMDU, as the VLAN could be 1015 fixed, and may not give us what we want, but we can try both ways.
 
Today my airfiber max connection equipment will be picked up after disconnection. I asked about the c6x. He told they dont take it back...i was like waaaaat! Probably that is the single lost expensive part of the entire system. Anyways, if anyone wants me to do any experimentation with the c6x, then send me PoE injector links which work with c6x and will modify whatever u guys ask me to modify on the c6x
 
Today my airfiber max connection equipment will be picked up after disconnection. I asked about the c6x. He told they dont take it back...i was like waaaaat! Probably that is the single lost expensive part of the entire system. Anyways, if anyone wants me to do any experimentation with the c6x, then send me PoE injector links which work with c6x and will modify whatever u guys ask me to modify on the c6x
They don't take the ODU/C6x, as if someone wants to install the connection on this building ID again.
Max to Max 1 year, and then they come and take it away.
As for your testing, you gain nothing from this, as it's just PTMP. Main sauce is the MMP Server.
Also, I decoded the IDU, and completely bypassed it's normal setup. Using my own openwrt router with full IPv6+464XLAT support.
 
I want to disconnect my jio airfiber connection and want to move to Airtel airfiber..My billing date is 11th of every month.
Can anyone suggest me by their experience ,how many days prior should I give my disconnection request to jio so that it gets disconnected on 9th or 10th and my next bill cycle not get start from 11.As per Jio cc it takes 3 days for disconnection and 7 days for device pickup.
 
Jio Is Deploying A6 Devices In My area On Vi Towers, vi's towers are installed on roads central werge approx 70 to 80 mtrs away from my home ,I am getting signal of new wifi name i thik they have not configured A6 now
 
Jio prioritizing UBR (Unlicensed Band Radio) for Airfiber connections from 5G site

 
Today night Jio Airfiber set to upgrade something..Got below msg

Dear Customer,

It is our constant endeavour to improve JioAirFiber services. We are in process of upgrading our systems and you may experience some intermittent connectivity issues for your JioAirFiber connection with JioFixedVoice Number 123435**** on 24-07-2025 from 12:00 AM to 24-07-2025 07:00 AM. Post the upgrade, in case you face any issue, restart your router and run a Diagnostic check below.
We regret the Inconvenience caused and thank you for your patience.

*Team JioAirFiber*
 
Last edited:
Back
Top Bottom