Discussion JioFiber ONT Firmware Updates

  • Thread starter Thread starter Bapun
  • Start date Start date
  • Replies Replies: Replies 21
  • Views Views: Views 14,404
Why there is no login visible it is blocked I can't login help me
I just logged into Jio Fiber ONT successfully. Do you have a screenshot of what you see at your end? 🤔
 
Login Button Is not visible

csKZANA.jpeg
 
Last edited by a moderator:
Login Button Is not visible

csKZANA.jpeg
I thought you had JioFiber because this thread is about JioFiber.

I can not say about AirFiber login page because I don't use it.
 
Some JioFiber users are receiving WhatsApp messages to update their router firmware.

Dear Customer,

Your JioHome router requires a software upgrade to enhance its performance

Please follow these steps:
1. Locate the small pinhole at the back of your router​
2. Use a pin to press and hold the pinhole for 10-15 seconds to reboot the device (you will see the light blinking red).​
3. Wait for the light to turn a stable green, which may take up to 5 minutes.​

Congratulations! Your router is now pgraded!

For a detailed step-by-step video guide visit: Jio ONT Reset

nzSRWx3.jpeg
 
First time seeing this where user has to do a manual s/w update, that too via reset option.

Normally ONT/Routers are updated remotely OTA like STB's, without a need to reset.
 
Last edited:
First time seeing this where user has to do a manual s/w update, that too via reset option.

Normally ONT/Routers are updated remotely OTA like STB's, without a need to reset.
Yeah. It has updated earlier on its own without user intervention. I don't see most people caring to do this much. I doubt many people would even give much thought to the message.
 
Must be for JioAirFiber's routers. Anyone got it for their JioFiber connection?
The message / screenshot (on my previous post) was received by JioFiber user only, not Jio AirFiber.
 
Back
Top Bottom