rahul1117kumar
Member
- Joined
- 21 Jun 2013
- Messages
- 10,365
- Reaction score
- 11,058
Steps for Flashing fastboot ROM:-
METHOD 1: Using MiFlash
Open MIUI ROM Flashing Tool.
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode (bootloader). Then connect the device to the Windows PC/laptop via a micro USB cable.
Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer.
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select ‘Run’). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step. Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
If you see the following image after rebooting, it means that you have succeeded in flashing MIUI fastboot ROM.
METHOD 2: Using Mi PC Suite
Download Mi PC Suite here .
Connect your phone to PC via USB Cable.
Enable USB Debugging.
Open Mi PC Suite (let it detect your phone).
Reboot your phone to fastboot mode.
Navigate to the Fastboot the fastboot ROM zip you want to flash.
Flash the ROM, done.
Precautions:-
Flashing a fastboot ROM will erase all data on your phone, so remember to take a backup.
Make Sure that you enable USB Debugging.
Both Methods require an unlocked bootloader.
Both the methods will relock your bootloader.
Install ADB and fastboot drivers properly.
Only use the firmware meant for your device else it may get hard bricked.
METHOD 1: Using MiFlash
Open MIUI ROM Flashing Tool.
Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode (bootloader). Then connect the device to the Windows PC/laptop via a micro USB cable.
Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer.
Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select ‘Run’). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step. Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
If you see the following image after rebooting, it means that you have succeeded in flashing MIUI fastboot ROM.
METHOD 2: Using Mi PC Suite
Download Mi PC Suite here .
Connect your phone to PC via USB Cable.
Enable USB Debugging.
Open Mi PC Suite (let it detect your phone).
Reboot your phone to fastboot mode.
Navigate to the Fastboot the fastboot ROM zip you want to flash.
Flash the ROM, done.
Precautions:-
Flashing a fastboot ROM will erase all data on your phone, so remember to take a backup.
Make Sure that you enable USB Debugging.
Both Methods require an unlocked bootloader.
Both the methods will relock your bootloader.
Install ADB and fastboot drivers properly.
Only use the firmware meant for your device else it may get hard bricked.
