Good News Jio is upgrading eligible AirFiber customers ODU with AirFiber Plus C6 UBR ODU free of cost

[kklkanna]

heinnn? how and who proceeded with this installation?

Local jio technician he lied to me that signal is around -48 dbm , but when i checked after the installation it is around -72-75 dbm, i think every technician get 1000 rs from jio for this migration , he did this update merely just to get this payment i think

 

[Athreya B N]

heinnn? how and who proceeded with this installation?

Yes they deny if its above 65

 

[IfranAli]

Yes they deny if its above 65

exactly, even 60 is a no-no in some ocassions.

 

[IfranAli]

Local jio technician he lied to me that signal is around -48 dbm , but when i checked after the installation it is around -72-75 dbm, i think every technician get 1000 rs from jio for this migration , he did this update merely just to get this payment i think

can you check if you have nearby Jio towers in your place? Then maybe you can change the A6 if possible.

 

[IfranAli]

C6 | Mimosa

The Mimosa C6 Non-Line-of-Sight Client Radio enables high-performance Point-to-Multipoint (PTMP) and Point-to-Point* (PTP) connectivity in challenging environments where clear Line of Sight (LOS) isn’t possible. With up to 2.5 Gbps throughput at the wireless interface and support for the 6 GHz...

mimosa.co

Incase anyone wants to learn about the Mimosa C6
@Lucifer_King apparently this one has 4x4 MIMO, and doesn't require an absolute LoS.
Works even in -78dBm and obstructed LoS.

 

[Lucifer_King]

C6 | Mimosa

The Mimosa C6 Non-Line-of-Sight Client Radio enables high-performance Point-to-Multipoint (PTMP) and Point-to-Point* (PTP) connectivity in challenging environments where clear Line of Sight (LOS) isn’t possible. With up to 2.5 Gbps throughput at the wireless interface and support for the 6 GHz...

mimosa.co

Incase anyone wants to learn about the Mimosa C6
@Lucifer_King apparently this one has 4x4 MIMO, and doesn't require an absolute LoS.
Works even in -78dBm and obstructed LoS.

But again as its basically PtP WiFi, without LoS, I'm expecting pings to be higher

 

[IfranAli]

But again as its basically PtP WiFi, without LoS, I'm expecting pings to be higher

PTMP brudda, PTMP. PTP is C6/C6x to C6/C6x. PTMP is A6 to C6/C6x.
Also, this one seems to have better hardware and will operate much better, since it has an integrated antennae, which doesn't require absolute alignment.

 

[Lucifer_King]

PTMP brudda, PTMP. PTP is C6/C6x to C6/C6x. PTMP is A6 to C6/C6x.
Also, this one seems to have better hardware and will operate much better, since it has an integrated antennae, which doesn't require absolute alignment.

Again, can't really defeat physics. Only time willl tell if its performance is worth it or not. Jio is going on an entirely diff route. Should've focused on fiber expansion instead of this crap

 

[IfranAli]

Again, can't really defeat physics. Only time willl tell if its performance is worth it or not. Jio is going on an entirely diff route. Should've focused on fiber expansion instead of this crap

Well yes and no. Depends on location as well. I am getting as advertised, but you were getting degraded performance.
This very well is that specific tower issue. You could have tried on another tower, but since it's disconnected now, it's a half-story at the most.
I have Kolkata friends, who had a different experience than yours. Theirs worked fine, but your's have issues day and night (except midnight).

 

[Lucifer_King]

Well yes and no. Depends on location as well. I am getting as advertised, but you were getting degraded performance.
This very well is that specific tower issue. You could have tried on another tower, but since it's disconnected now, it's a half-story at the most.
I have Kolkata friends, who had a different experience than yours. Theirs worked fine, but your's have issues day and night (except midnight).

Tried to attach it to a different tower but the issue is there is no nearby tower other than that one which has A6 on it